Laser cutting and engraving
Convert an image into clean monochrome paths for laser cutters and engravers — closed loops, real-world units, SVG or DXF.
What a laser expects
A laser cutter thinks in toolpaths. It wants closed loops for cuts, filled regions for engraving, no duplicate lines stacked on top of each other (which burn twice), and as few tiny segments as possible, since every direction change slows the head. A raw trace often has all of those problems.
The laser preset produces a single colour, cut-out geometry with no overlaps, simplified curves and closed paths. It opens on the DXF format with a cut check ready, and you can switch to SVG with one click. DXF export merges shared edges by default: where two colour regions meet, the boundary is written once, so the laser does not burn the same line twice.
Sizing it for the bed
In Export, choose millimetres or inches and type the finished width. The SVG is written with that physical size, so it imports at the right scale. The checks also use it: a detail that is fine at 300 mm can be too fine at 30 mm, and the tool tells you which shapes are at risk.
Engraving tips
- Stencil mode adds bridges so letters like O, A and B keep their centres when cut through.
- Raise smoothing for wood, where small wobbles show in the grain.
- Check the Inspect step for the node count — fewer nodes means a faster, smoother job.
Related making tools
Laser questions
SVG or DXF?
Use whatever your laser software prefers. LightBurn, xTool Creative Space and Glowforge accept SVG; CAD-based workflows often want DXF. Both exports use the same geometry; DXF is written as closed polylines in your chosen unit.
How do I make cut lines versus engrave fills?
Trace as filled shapes for engraving. For cutting, use the outline action in the Edit step to turn fills into hairline strokes, which most laser software treats as cut lines.
Will curves come out smooth on the laser?
Curves are true Béziers in SVG. In DXF they are flattened to short straight segments at a tolerance fine enough not to show at normal cutting speeds.
Can I engrave a photo?
For a vector engraving, choose Duotone or Stencil style first so the photo becomes a few solid shapes. For greyscale raster engraving, your laser software works better from the photo itself.
