Convert an image to DXFTurn any picture into a DXF

Drop a JPG or PNG and get closed outlines that CAD and cutting software can open.

Convert a JPG or PNG to DXF: closed polylines in mm or inches, one layer per colour, shared edges written once. Traced on your device, never uploaded.

  • DXF R12 polylines
  • Millimetre and inch units declared in the header
  • One layer per colour
  • Shared edges merged so nothing is cut twice
A round star logo: the left half is the original bitmap, the right half is the traced SVG with smooth edges

Drop the image to convert to DXF

Logos, line art, silhouettes and lettering work best.

Image to DXF

Turn a JPG, PNG or WebP into a clean DXF for laser cutters, CNC routers and CAD — closed polylines in real units, one layer per colour, every edge written once.

From pixels to toolpaths

A JPG or PNG is a grid of coloured squares; a laser, plasma cutter or CNC router needs lines to follow. The image is traced into shapes on this device, each shape's outline is written as a polyline, and the result is saved as a DXF that CAD and CAM software can open directly.

The page opens with settings tuned for cutting: one colour, cut-out regions that do not overlap, simplified curves and closed outlines. Change the mode or colour count in the Vectorize step if your artwork needs more.

Getting the size and units right

In Export, choose millimetres or inches and type the finished width. The DXF is written in that unit, so it imports at the right scale instead of arriving tiny or huge. The cut-file check judges detail at that size: a feature that is fine at 300 mm can be too fine to cut at 30 mm.

Layers and shared edges

  • One layer per colour. Each colour becomes its own layer, named after the layer names you set in the Palette step, so you can assign cut, score and engrave settings per layer.
  • Every edge once. Where two regions meet, the boundary is written once. Your laser does not burn the same line twice.
  • DXF R12. The oldest and most widely read dialect, so the file opens in old and new software alike.

Related making tools

DXF questions

Which units does the DXF use?

The ones you choose. Set a finished width in millimetres or inches in Export and the coordinates are written in that unit, with the unit declared in the file header ($MEASUREMENT). Left in pixels, one pixel becomes one drawing unit.

Will it open in LightBurn, Fusion 360 or AutoCAD?

The file is DXF R12, the most widely accepted DXF dialect, which LightBurn, Inkscape, LibreCAD, AutoCAD and most CAM tools open. A few newer programs ignore the R12 unit setting and ask for the unit on import: answer with the unit you chose here and the size comes out right.

Why does my laser cut some lines twice with other converters?

When two colour regions touch, a naive export writes the shared boundary once for each region, so the laser burns it twice. Here Merge shared edges is on by default: a boundary already written is skipped, so every line is cut once. Turn it off if you need every region as its own closed loop.

Are curves kept as curves?

They are flattened into short straight segments at a 0.1-unit tolerance, which is finer than a laser kerf. That is the form R12 and most CAM software handle most reliably.

What kind of image works best?

High-contrast artwork: logos, line drawings, silhouettes, lettering and stencils. A photo can work, but choose Silhouette or Stencil mode first so it becomes a few solid shapes rather than thousands of tiny ones.